Freud is known worldwide for quality and innovation. Freud TCT saw blades have been developed using individually specified carbide to produce a complete range to suit your needs.

Freud Pro saw blades use the highest quality materials, combined with advanced design features to deliver outstanding cutting performance throughout the life of the saw blade. These saw blades feature:

• Super Micrograin Carbide Tips with Titanium
• Laser Cut Body
• Advanced Tri-Metal brazing
• Whisper Quiet Laser Cut Expansion Slots
• Precision Tensioning
• Anti-Kickback Design
• Perma Shield, Non-Stick Coating Reduces Resin Buildup
• Lifetime Guarentee Against Manufacturing & Material Defect

These blades are designed with a high number of teeth and are particularly fit for cutting solid wood cross the grain. They give a good finish if used in this way.
* LP40M 019 is also suitable for cutting non-ferrous metals.

These blades are designed with an average number of teeth and are particularly fit for for both long grain and cross grain cutting solid wood. They give a good finish if used in this way.

The anti-kick design makes these blades particularly useful for on site jobs. With a low number of teeth they are fit for long grain cutting of solid wood. They give a good finish if used in this way.

These blades are designed for cutting non-ferrous metals such as aluminium. The work piece must be properly clamped during cutting. The saw blades come with two pin holes.

Special saw blade with Perma Shield coated body for an excellent and clean cross cut of wooden picture frames coated with delicate and abrasive materials. Gives a perfect finish without splintering even when cross cutting 45 degrees. For use on automatic and manual mitre saws.

Freud Industrial saw blades use the highest quality materials, combined with advanced design features to deliver outstanding cutting performance throughout the life of the saw blade. These saw blades feature:

• Super Micrograin Carbide XL-Tips Tips with Titanium
• Anti-Vibration
• Quieter Working Environment (40% reduction in noise levels)
• Laser Cut Body
• Superior Cut
• Precision Tensioning
• Heat Expansion Slots
• Advanced Tri-Metal Brazing
• Lifetime Guarentee Against Manufacturing & Material Defect

Suitable for ripping with medium finish on softwoods and hardwoods with maximum thickness of 60mm and single or multiple chipboard panels up to 60-100mm. These blades are suitable for use on table or mitre saws.

Suitable for ripping with medium finish on softwoods and hardwoods with maximum thickness of 60mm and single or multiple chipboard panels up to 45mm. These blades are suitable for use on table saws.

Suitable for ripping with a maximum thickness of 40mm and cross sutting with a maximum thickness of 45mm of softwoods, quality hardwoods and exotic woods, with a good finish. Maximum cutting thickness for wood composites is 40mm. For use on a table saw. The Thin kerf requires less horse power.

Suitable for ripping with a maximum thickness of 40mm and cross sutting with a maximum thickness of 45mm of softwoods, quality hardwoods and exotic woods, with a good finish. Maximum cutting thickness for wood composites is 40mm. For use on a table saw. The Thin kerf requires less horse power.

Saw blade for cross cutting of softwoods, hardwoods and exotic woods up to 60mm with excellent finish. Also used for single or multiple chipboard panels.. These blades are suitable for use on table saws.

Saw blade for cross cutting with excellent finish on hardwoods and exotic woods up to 55mm and single sided laminated panels up to 40mm. For cutting with medium finish on formica sheets and PVC up to 10mm. Maximum cutting thickness for ripping is 25mm. For use on a table saw. Thin kerf requires less horse power.

Saw blade for cross cutting with excellent finish ob hardwoods and exotic woods up to 60mm and single sided laminated panels up to 40mm. For cutting with medium finish of formica sheets and OVC up to 10mm. Maximum cutting thickness for ripping is 25mm.

Saw blade for cutting single sided laminated panels, chipboard and plywood up to 30mm. This blade in combination with a scoring blade gives an excellent finish on double sided laminated panels. For use on table saws.

Saw blade for cutting double sided laminated panels with an excellent finish without the need of a scoring blade. For use on a table or wall saw, but not recommended for plywood cutting.

This saw bladedoes not require a scoring blade as its unique dual tooth configuration cuts through laminatede panels whilst leaving an excellent finish. It also features noise reduction slots. For use on table and walls saws.

These blades are designed for cutting non-ferrous metals such as aluminium with wall thicknesses up to 3mm. The work piece must be properly clamped during cutting. The saw blades come with two pin holes - 11mm DIA x 63mm PCD.

These blades are designed for cutting non-ferrous metals such as aluminium with wall thicknesses up to 10mm. The work piece must be properly clamped during cutting.

These blades are designed for cutting non-ferrous metals such as aluminium with wall thicknesses up to 5mm. The work piece must be properly clamped during cutting.

These blades are designed for cutting non-ferrous metals such as aluminium with wall thicknesses up to 5mm. The work piece must be properly clamped during cutting.

Saw blade for cutting, in combination with a scorer, gives an excellent finish on coated chipboard with a maximum depth of 40mm. Without scorer, good finish on chipboard and MDF coated on one side only. For use with table saw.

Saw blade with Perma Shield coated body for cutting double faced laminated chipboard without chipping. Specially designed with a negative cutting angle and tips made of a special grade of carbide. This blade is ideal for table saws not fitted with scorers or for wall saws.

Special saw blade with Perma Shield coated body for an excellent and clean cross cut of wooden picture frames coated with delicate and abrasive materials. Gives perfect finish without splintering even when cross cutting at 45 degrees. For use on automatic or manual mitre saw.

Special saw blade with Perma Shield coated body for an excellent and clean cross cut of wooden picture frames coated with delicate and abrasive materials. Gives perfect finish without splintering even when cross cutting at 45 degrees. For use on automatic or manual mitre saw.

Saw blade for cutting plastic materials and plexiglas. This blade is designed with a negative hook angle and tips made of a special grade of carbide, giving a perfect finish without melting or scratching the material. The blade must work 30mm above the material cut.

Saw blade for ripping with medium finish on softwoods and hardwoods with maximum thickness of 60mm or 80mm crosscutting. Suitable for single or multiple chipboard panels up to 60mm. Thin kerf requires less horse power. For use on bench saws and mitre saws.

Saw blade for ripping and crosscutting with medium finish on softwoods and hardwoods with maximum thickness of 60mm. Suitable for single or multiple chipboard panels up to 45mm. Thin kerf requires less horse power. For use on table saws.

Saw blade for crosscutting with excellent finish on hardwoods and exotic woods with maximum thickness of 70mm. Suitable for single or multiple chipboard panels up to 40mm. Thin kerf requires less horse power. For use on table saws.

Saw blade for crosscutting with excellent finish on hardwoods and exotic woods with maximum thickness of 30mm and for sizing chipboard, plywood and one sided laminated panels up to 25mm. For use on table saws.

These blades are designed for cutting non-ferrous metals such as aluminium with wall thicknesses up to 2mm. Excellent also for cutting plain aluminium or non-ferrous bars. The work piece must be properly clamped during cutting.

These blades are designed with Anti-kick (AKB) for ripping with medium finish on softwoods and quality hardwoods with loose knots. Thin kerf requires less horse power.

These blades are designed with Perma Shield coated body and Anti-kick (AKB) for ripping softwoods and quality hardwoods with loose knots.

Scoring saw blade to be used in combination with a panel sizing blade to avoid chipping on lower side of panels coated on both sides. Scoring depth up to 2mm.

Please contact us with your requirements regarding all circular saw blades.
All goods are sold subject to our standard Conditions Of Sale